MXR M234 Analog Chorus | The unheralded workhorse of chorus pedals

MXR M234 Analog Chorus | The unheralded workhorse of chorus pedals

MXR M234 Analog Chorus | The unheralded workhorse of chorus pedals

I can’t say that I am a Chorus Effect aficionado, at least not yet but, I do appreciate the effect and like to incorporate it from time-to-time into my tone libraries. With anticipation of limited use, I have been trying to find something affordable; certainly not wanting to make it the most expensive pedal in my setup. As I journeyed through the search process, I always held the Strymon Ola and the Analogman Mini Chorus (w/ full options) as the two top-tier choices but both were more than what I really wanted to spend. In lieu of those two options, I have worked with or demoed a few other pedals in my search and would start by sharing the following feedback:

  • MXR Micro Chorus: I started with this pedal for the first two or three months – Positives: Very easy to work with, the range of effect covers most of the common bases/settings one would use for Chorus. Drawbacks: Lack of more in-depth control to dial in variations of chorus based on combinations of speed & depth. Slight Volume Boost when engaged. No tone/mix control to adapt to gear or control intensity.
  • Way Huge Blue Hippo Chorus MK II: I wrote the following review when I first got the pedal and added it to my board, NPD: The Way Huge Blue Hippo MK II Review, so I won’t go into much more detail. Positives: Easy to work with, a great range of the effect AND ability to dial in a great many combinations of speed & depth. Vibe switch was an added bonus to get more out of the one pedal. While it lacked a mix/blend, it was so very easy to dial in a subtle chorus. Drawbacks: The pedal just clipped the highs from the second it was engaged, very focused in the mids. In lacking tone control, I found that it was not as flexible in adapting to other gear (e.g. changing between guitars).
  • Keeley Seafoam Chorus: I only had this pedal long enough to give it a quick test drive; I knew very quickly it was not for me. It was a solid Chorus Pedal and certainly got me closer to the sounds I was in search of. The general feeling was, in comparison to the price points of other pedals and then factoring the final product (what you got in return), it was not worth the premium paid. Positives: Good spectrum of effect thanks to rate and depth controls. Blend control was an interesting approach to switching between Vibrato & Chorus or finding something new in-between. Tone knob allowed the pedal to work well with both my LP and Strat. Drawbacks: As hinted at earlier, for what the pedal offered, the price seemed a bit high. While listed as a strength, I would have preferred a vibe switch and then the mix control would have been a mix between dry signal and effect –> much more useful. Maybe it was the digital aspect, but I experience a very nuanced delay at times while the effect was engaged but before the wet signal would kick-in compared to the dry (as best described). It was noticeable enough to have me pause once or twice to check what I really was hearing.

All of this leads me back to the MXR M234 Analog Chorus that arrived today. This pedal has been recognized or referenced as the unheralded workhorse on theGearPage.net forums. Anytime there is a discussion about what chorus option one should consider, its name quickly appears as a recommendation. I am sort of kicking myself for not trying it sooner since it was only a bit more than the Micro Chorus. After an hour or so since placing it on my board, here is a quick “First Impression”:

It is a solid Analog Chorus with a great range of effect, from subtle to leslie-esque, and with granular controls to really provide adaptability to any and all gear you might use with it (from other pedals to different guitars). Throw in the simplicity to dial-in a classic chorus sound and I’m not sure what else I could have asked for. Thanks to the Hi and Low Cut Controls, no more “murkiness”, especially when using the LP, and yet you can still have the expected “warmth” of analog chorus or, if it one’s preference, to dial-in a lighter/airier feel that provides a bit of sparkle. The level control allows for more subtle chorus presentations. To summarize, and when looking at my experience from the other pedals, in essence what the MXR m234 provides represents the strengths of the many pedals listed above: Simplicity, Adaptability, Range and Variation of Effect, Intensity of Effect. Note: If you are looking for some uber-intensity or modulated craziness, this pedal is probably not what you are looking for. While it can get a bit wacky on the highest settings, it is still pretty straight forward in its approach.

[Update: Day 2 Impressions]

Since its arrival yesterday, I have now have several more hours, spread across a few different practice sessions, to run the pedal though its paces. The trials included usage of both guitars, interactions with various combinations of different pedals, and application/usage in songs from my set-list. The key to the success of this pedal, making it different than the other pedals that I’ve tried and listed above, is the three controls: Low Filter, High Filter, and Level. The original tone of the guitar is kept intact – the full spectrum of frequencies retained with the chorus effect added providing a sense of greater width (“fatness”). The intensity of effect can be adjusted to one’s liking thanks to the “level” control. The Low & Hi controls can either provide warmth of analog, a bit of murkiness if desired, or really making for an articulate and light heavenly chorus.

I am trying not to GUSH about this pedal (pun intended) but rather, to provide some helpful analogies to convey the types of tones I am able to achieve with the pedal. Last summer I started a project to create a new pedal board setup, adding one component/pedal at a time, and Chorus has been the one effect I have struggled with the most, not being able to find the classic sound without having some sort of issue. At this point in time, and based on the feedback I detailed above, the dual-lock has been applied to the MXR234 and the pedal affixed securely to the board. Where I struggled to find an appropriate time and use for Chorus before, I now very happily turn it on and enjoy the sounds I get. For my wants and needs, the search is over.

[Update: A few days, A few gigs later]

Now that I have had some real-world live performance usage, I am happy to report back that the pedal is fantasic — for all of the reasons mentioned above. In previous performances (pre-ownership of the MXR M234), I struggled to find a good tone/mix of the chorus effect, allowing me very few opportunities to actually utilize the pedal. With the MXR Analog Chorus, I was able to effectively use it in at least four or five of my songs plus some additional sections (where it would be appropriate) with great results. The versatility and flexibility of this pedal really open up its overall potential and possibilities of use.

As with my other pedals, if things change, I will come back to provide an updated perspective and additional insights.

The Way Huge Blue Hippo MKII | A cool splash of chorus for the summer

The Way Huge Blue Hippo MKII | A cool splash of chorus for the summer

The Way Huge Blue Hippo MKII | A cool splash of chorus for the summer

If last summer launched my pedalboard design and effects selection project, this summer has initiated “phase 2”; refinement and tuning. As part of this process, I ordered two new pedals this past week; The EarthQuaker Devices Levitation (to change out my EQD Ghost Echo) & The Way Huge Blue Hippo MKII (to upgrade from my MXR Micro Chorus.)

To see my review/comparison of the Levitation, please click here: https://www.thegearpage.net/board/i…-earthquaker-devices-reverb-w-review.1588869/. I suspect that this review will be much shorter in length, not that the Blue Hippo MKII is any less of a pedal.
​Two days, two new pedals; The Way Huge Blue Hippo MKII arrived today. It has been six months since I acquired the MXR Micro Chorus; my goal was to learn more about how the effect could be incorporated in my current projects, and as to what extend that would be. With a better understanding, it seemed an appropriate time to upgrade, primarily seeking more control. The Micro Chorus was a solid sounding analog chorus but simple to a fault. The one control/knob allowed one to easily dial-in several great settings within the spectrum of speed but any fine-tuning or custom blending of speed and depth was not feasible. There was also the slightest of volume bumps when the pedal was engaged.

Enter the WAY HUGE BLUE HIPPO MKII, an analog chorus pedal made with NOS (new old stock) bucket brigade chips; the same used in the original design of the pedal. It has top mounted jacks; a feature I was specifically looking for due to limited space on my board. There are three control options: speed, depth, & vibe switch. The settings allow for finite control over the resulting chorus effect and intensity thereof. Users can dial in a great variety of chorus sounds. I found that the pedal was voiced with a slight emphasis in the mid-level frequencies which probably correlates to a “warmer” sound. While there is a “sparkle” that starts to appear as one dials up the effect, I found the pedal filtered/mellowed some of the highest frequencies of the dry tone. There is a healthy amount of bass throughout but not overpowering by any means.

After a few hours or playing and running though a myriad of settings — I really enjoy the tone and flexibility of the Blue Hippo. It successfully meets many of the needs I had identified with respects to control. A very subtle chorus can be achieved in a few different ways: turn the speed way down and adjust the depth to one’s liking or, turn the speed up to about 11pm on the dial and then turn the depth way down to about 7~8 pm. It gives it a very fat solo sound. Where I had found the MXR Micro Chorus to be overly intense much of the time (read: “click”, the CHORUS pedal is now on), the subtleties I could dial-in on the Blue Hippo makes the effect much more compatible for my use. Many have suggested (including the manual) to have the speed all the way down and the depth all the way up for a different type of mellow chorus.

As for the VIBE Switch, I would suggest it is a nice bonus feature – colored sprinkles on ice cream. It sounds good and can do some fun things. As it provides 100% of the wet signal, you can really hear how the highs are mellowed out and the mids take more focus.

Another good setting for a lively chorus is with the speed around 11pm and the Depth around 1pm. In general, it does take just a tad bit more work, obvious I know, to find the tones offered by the Micro Chorus but they are all certainly there, including the Leslie sounds, as well as many new additional effect tones.

About the foot switch: Sturdy and yet has a soft-click to it as compared to some of my other pedals that have a very hard feel to the action of the switch.

I wish there was more I could say but as I had suggested at the start of this post, this review is a bit more straight forward. To quickly add, the pedal feels physically bigger compared to other pedals as it sits up off the board a bit but it is not too much wider or taller than a regular mxr-sized pedal. I share this as many of the other pedals in the Way Huge product line are bigger in size.

[UPDATE: Day 2 Observations]

As the case with most all of my pedal first-day introductions, I like to give my ears and mind some rest before we reacquaint ourselves the next day to either validate or expand upon those first impressions.

I am happy to share that I am still “vibing” (pun intended) the Blue Hippo Chorus, both the sounds and scope of effect thereof. I prefer the mellowness that I did not have before with the Micro Chorus but, make no mistake, the pedal can get into crazy-land if so desired. I have often placed some importance in having a ‘Mix’ control on my effects (for those who have seen my other postings on the TGP), but I find that, inherent to the ability to mellow out the effect via adjustment of the speed & depth, one also gains the ability to control the mix (per-se). The Chorus effects are generally set to be at a 50/50 split of wet vs the dry signal so, in being able to minimize the parameters it is essence “turns down” the effect.

Some additional thoughts about the Vibe: In basically it’s default setting (as shared in the manual), it has this really cool, drenched, sort of sound to it. It reminded me of playing some old vinyl, a bit compressed and mid-focused, and … if I didn’t know better, I could have sworn (read:imagined) that I was hearing the sort of crack and pop randomly heard when playing records. Don’t panic though – LOL — there was no audio artifacts present, the tone just played up that feeling in my mind.

If there has been one pause so far about this pedal — and this is a personal taste — while I like the bright blue light, I could have done without the flashing indication as to speed. Maybe I am just getting older.

[Update: … after two months we parted ways]

I tried to like it, honestly I did. The control mechanics, the use of “new old stock”, the physical aesthetics, the vibe feature … all good things. The implementation and voicing were just too heavily focused in the mids and thus the overall tone was easily ‘muddied’. This was even more exacerbated in the vibe mode. The second the effect was activated, the clipping of the highest frequencies was instant with no noticeable pass-through of the dry signal highs to compensate. Perhaps when using the single coils of the Strat, the pedal was more friendly/adaptable but with the Les Paul, it just didn’t seem to be at all friendly. Had the pedal had a tone control system to allow one to dial in the highs or flatten the lows, then it probably would have easily been a keeper for me … and/or … the presence of a mix/blend control would have allowed the highs to be retained in the same sort of fashion.

I have since tried the Keeley Seafoam which easily addressed the tone problems and adaptability between guitars but otherwise, was just “Ok” considering the price point. There was also some sort of processing delay between the dry and digital effect that was just enough to “itch” my ear a bit (read: throw me off). I just received the MXR M234 Analog Chorus which I can already tell is hitting all the targets of ‘Wants and Needs’ and easily dials in great range of classic chorus sounds. Read my NPD post here: MXR M234 Analog Chorus | The unheralded workhorse of chorus pedals

Quilter MicroPro 200-8 | Powerful, Flexible, and Uber Light

Quilter MicroPro 200-8 | Powerful, Flexible, and Uber Light

Quilter MicroPro 200-8 | Powerful, Flexible, and Uber Light

Initial Impressions: First few days

SOUNDS FANTASTIC! In the first few hours of playing, there are just so many sounds one can dial in and it seems to handle anything I throw at it. The versatility of the EQ & Tone settings just seem endless and provide such a rich foundation to build on. The thought occurred to me as I was playing around — the clarity/crispness/fullness makes the whole experience feel like I was listening to an “HD” amplifier if there was such a thing.

Also … not that I can sing nearly as well as I can play, but I did plug-in the Microphone and the whole combo things works as advertised. Compared to my Fender and Crate, this thing is very light. As it is loud enough for small performances, and expandable for bigger venues, this is truly a great AMP for all purposes and occasions.

[Update: A few weeks later and additional thoughts]

This past evening I was playing around with my Strat & the MicroPro 200 (sans Pedals). I was just trying to keep it simple and try out a few things both with the Guitar and Amp. I had added a LP to my gear this past year and have been spending most of my time playing with that thus, it was nice to revisit the sound and feel of the Strat.

I wanted to share specifically to the Quilter MicroPro ….

This amp is fantastic, such a rich organic sound, and so very tweakable. I continue to find great sounds every time I try/do something different. It is important to note, for those that might be interested in this amp that my experience with using it has been a bit different from any amp I have ever owned — not that I have had that many. To clarify, while the basic tone/foundation is solid from the minute it powers on, you really do have to know and understand what all the controls do — even more so — how they interact with each other.

Beyond the base tone, this is not the type of amp that you push a button or turn a knob to get the sound you want. Instead, you will have to tweak more than a few different settings to dial in the tone you want — this does make for some great trial and error. For instance … you can turn up the gain for some distortion but you will probably also want to turn on the loud boost setting, dial back the presence, and add a dash of Limiter to get a great edge-of-breakup blues sound. While this can equate to a bit more work, I feel like I understand the function and interaction of different circuitry (i.e. gain and limiter) which is worth the price of admission for such an amp. A helpful way to think of this is to consider the difference between throwing a tv dinner in the microwave vs gathering the ingredients and cooking fresh on the stove top. Now certainly, for some sound and functions of the amp, it is just that easy to turn it on, adjust the EQ and then you’re off and running — it’s just nice to know how deep the user control and tweakability is if desired.

Finally, I would share that I had an opportunity to sit-in for part of a set with a long-time friend at a private event a few weeks back. There were a lot of other musicians in attendance and many of them commented on how great the amp sounded — not to mention how easily it held it’s own outdoors competing with a drummer and PA system. As for having to carry it around — so light and easy :)

[Update: After six live performances]

The Quilter MicroPro 200-8 is Fantastic. Super Light and Easy to Carry with NO Sacrifice of RAW Power. It holds its own and stands proud. Having played at some smaller venues, with up to about 30 to 40 people in attendance, I haven’t had to turn the amp but a smidgen past half-way on the volume level. Fellow musicians in attendance are honestly amazed in both the strength and quality of sound; very rich and full spectrum. The Quilter MicroPro has become my main/”goto” amplifier.

[SIX YEARS LATER – Added: April 13th, 2021]

Here is a quick and honest update to share …

6 Years & many gigs of all types later the MicroPro 200-8 is still my main Amp. I’ve teased a few other amps throughout this time but they’ve only at best played a supporting role. Further, I have enjoyed a few other Quilters to include the 101, 101 Reverb, Tone Block 200, and the Microblock — the Reverb 101 paired with BlockDock 10 being the preferred amp out of that particular bunch.

A year or so after writing the review above, I ended up getting the matching Quilter 12″ Extension which I later upgraded to the HD speaker — It has been Fantastic! Even when not needing more volume, the 12″ Cab just added some more fullness and bass. That said, when performing at outdoor gigs, while the amp would honestly be just fine, the larger speaker again helped disperse the sound a bit better and added some oomph. Currently, in the home studio, I have the pedalboard outbound signal split into two with one side going to the MicroPro and the other into a REVV D20 which is then hooked up into the Quilter Cab. With the various voice settings available to me on the MicroPro, I can mix and match various amp types for all sorts of fun combinations between the two —- all without taking up very much space.

Final note: During this 6 years, my pedal board as grown and changed exponentially and, no matter what type of effect, boost, or gain I threw at the Quilter amps, they handled it all like champs. I am always excited to see what Quilter brings out next — oh yeah, and my back sincerely appreciates the lighter weight